Material | GI |
Shape | Rectangular |
Size/Dimension | 100x100 to 1200x1200 |
Country of Origin | Made in India |
Power | no |
Surface Finished | Zinc |
Thickness | .6 mm to 1.6 mm |
Usage/Application | HVAC |
Color | raw |
Plenum in heating, ventilation, and air conditioning (HVAC) systems is a box that connects to the HVAC system. It has a critical function and that is to bring in distribute and remove air.
Introduction: Correct selection and sizing of distribution plenum chambers is critical because terminal air resistance is very low relative to the distribution duct-work resistance. It is therefore recommended that whenever possible terminals are served by low velocity stub ducts from branch ducting systems fitted with correct balancing controls.
Installation: The plenum boxes and neck reducers are supported by 4 drop rods through a locating hole positioned near each corner. When ordering plenum chambers please specify length width & height, spigot size and position (top or side entry) and control options. Please note that the plenum height should in general be 100mm greater that the spigot diameter (side entry applications).
Features :
- Galvanized steel with seamless joint
- Acoustically lined option available
- Available in Side/Top entry
- With circular, square or rectangular spigot
- Available with collar damper or butterfly damper